Posts

Best Home Electrical Tips

Do you have an upcoming home improvement project that involves electrical wiring? Before you get started on your project, you should make sure that you are following certain safety precautions to avoid electrical shock and other accidents. Taking care of projects on your own can save you money, but to ensure you are safe against potential dangers, you should take the time to understand what you are getting into. Whether you are wiring lights or connecting electrical wires, look over this list of best home electrical tips before you take out your tools and begin your renovation.

Before starting any electrical wiring projects, make sure you turn off the electricity to avoid any hazards.

 

Labeling Your Circuit Panel

 

Before you start messing with electrical wiring in your property, you will need to know which outlets and electrical connections are connected to each other. You may need to shut off power to specific parts of your house. In order to do this, you will have to access your circuit panel. When your circuit panel was installed, there is a good chance that various rooms and outlets were labeled on the circuit panel. Over time, through renovations and changes to your home, these labels could become outdated or incorrect, especially in older homes.

 

Take a look at your circuit panel and see if it contains any labels. Next, go through your home identifying which locations go to each circuit breaker. To do this, turn on all your lights. You may also need to connect a lamp to an outlet to determine which circuit it is connected to. Now turn off one of your circuits on your panel and see which room the power was shut off to. Go through all the circuits, examining which rooms and electrical outlets each circuit is connected to. Add labels as you go and re-label any incorrectly marked circuits. Having a fully labeled circuit panel will help you when it comes time to shut off power to the area where you will be working.

 

Dealing with Light Bulbs

 

Every home has lights and most homeowners do not give much thought to what lights they use. When they burn out, we simply replace them and move on. If you want to ensure your light bulbs last as long as possible, there are a couple of tips that you should keep in mind.

Packaging for an LED bulb that can be dimmed

Use bulbs with the correct wattage in order to prevent lightbulbs from burning out quickly and shattering.

 

Always purchase light bulbs that match the wattage of the light fixture. Most light fixtures are labelled with the correct wattage to use. Using a light bulb with a higher wattage than the fixture can handle could cause your light to burn out quickly. In addition to having your light bulb burn out quickly, another problem that you may encounter occasionally is broken light bulbs. It can be dangerous to attempt and remove a broken light bulb with your hand. First, turn off power to the room with the broken light, which should be easy if you have labelled your circuit panel. Now attempt to remove the light bulb using a pair of pliers. If you have difficulty using pliers, then consider using a potato to unscrew the bulb without the risk of cutting your hand.

 

These are just a few tips for dealing with electricity in your home. If you are ever unsure about the best way to handle a project that involves electrical wiring, you should consult with a professional or hire an experienced electrician. Safety should always be your primary concern. Do your research, and contact a professional when needed.

 

DIY Lighting or Hire an Electrician?

Installing a ceiling light fixture

Installing a new light fixture can be a fun DIY project, or a nightmare better handled by a pro.

Been watching home improvement TV shows lately? Of course you have! They make it all look so easy and get us excited about those three little letters: DIY. Take a deep breath and a dose of reality. When it comes to home lighting projects, it’s important to think carefully about what the job requires. Only then can you make a smart decision between hiring an electrician and doing it yourself. Here’s a checklist of questions that may help you figure it out.

Do you understand electrical wiring and connections?

You don’t have to be a pro to complete simple projects, but a basic understanding of electrical outlets and wiring is essential to your safety. Do you know where your circuit breaker panel is? Do you know how to turn off the power supply to the fixture you’re working with? When you pull off the fixture and are confronted with a tangle of wires, will you know which is which? There are guides online to help explain it step by step, but look them over first and see if you can follow along or if it’s all a bit overwhelming.

If installation of a light fixture will involve switching out or rerouting cables, this adds some complexity. In this case, unless you have special knowledge of or prior experience with wiring, hiring an electrician is best.

What tools are required for the lighting installation?

Using a screwdriver to adjust a light switch

You may have all the tools around the house, or the project may require an electrician’s tool bag.

DIY lighting may require particular tools. For example, to replace most fixtures you will want a wire stripper to prep the fixture for attachment to ceiling or wall electrical wiring. If you don’t have a stripper, use a utility knife in its place. A power drill makes mounting new fixtures simple and fast, but a screwdriver is a reliable option as well. We strongly recommend using a voltage tester to confirm that the power is off before you start fiddling with bare wires.

Are you adding a new fixture where none existed before, either on the wall or the ceiling? You’ll need quite a hefty list of tools, from a stud finder to a jab saw, making this an ambitious DIY lighting project.

Does your new light fixture come with mounting materials, and clear instructions?

When you pull your new sconce, ceiling light, or pendant out of the box, you might feel like a kid on Christmas morning. Put your giddiness in check, and check the box for mounting instructions and supplies. Most lights will include a mounting bracket and screws that fit the fixture. Like our stylish 13.5″ Drum Top Ceiling Light, which comes with a plate for semi-flush mounting. Your fixtures should also come with instructions showing materials included, configuration of wiring, and also the maximum wattage for lamping. Fabby’s ceiling fixture installation guide includes a clear, helpful diagram. Easy instructions make do-it-yourself lighting projects simple.

If mounting instructions are not included, the task before you becomes more challenging. Can you fit tab A into slot B based on intuition and clever guesses? Electricians have seen just about every type of fixture out there, so hiring a professional may be easier than trying to figure it out yourself.

Is there any visible damage or wear?

When working with electrical wires, wear and tear is a sign of danger. It can cause shorting and lead to an electrical fire. If you begin to replace a light fixture and notice that the hardwiring in your home looks distressed, then it’s time to hire an electrician.

As long as you disconnect power, have all the right tools, and feel comfortable with a project, DIY lighting installation is a safe and fun project. For more complicated wiring, we recommend letting your electrician take it on. Happy renovating!